×

recovery boiler meaning in English

回收锅炉
再生锅炉

Examples

  1. This paper provides the reference for the transformation and design of waste he . it recovery boiler in engineering
    本文的结果可为工程上余热锅炉的改造设计提供参考依据。
  2. Further , waste heat recovery boiler and steam turbine are combined to improve system efficiency , resulting combined cycle generation . main characteristics of this technology are as follows
    为进一步提高系统效率,可利用气化系统和内燃机产生的余热,通过余热锅炉和蒸汽轮机实现联合循环发电。
  3. This essay has touched upon the following work : 1 . has built up theoretic models including static mathematic models of air compressor , combustion chamber , gas turbine , waste heat recovery boiler and steam turbine which are deduced according to the feature and theory of the equipment of the object of study . upon establishment of each model based on the actual conditions , a method of multiple imitation and combination is applied to parts which have already got characteristic curves to have achieved quite accurate curves whilst the method of neural net is applied to the parts which have no characteristic curves for establishment of models
    本文进行了以下的主要工作:建立理论模型,根据对象的实际设备的特点和理论关系推导压气机、燃烧室、燃气轮机、余热锅炉、汽轮机的静态数学模型;根据本研究的实际情况,在建立各部件模型时,对已有特性曲线的部件,采用多项式拟合的方法,得到较为准确的特性,而对部分没有曲线的特性,则采用神经网络的方法建立模型。
  4. Using the opened thermosiphon of 38x3 as experimental element and water as working fluid , the characteristics of dynamic low load boiling , stable severe boiling heat transfer coefficient and critical heat flux are gotten for the opened thermosiphon at the pressure of 0 . 02 - 0 . 1mpa and 0 . 1 - 0 . 8mpa respectively , which makes up the drawback that the opened thermisiphon has not yet accurate boiling heat transfer relationship formulas . by means of experimental results , an opened thermisiphon waste heat recovery boiler is designed for the high temperature gases that the positi e electrode copper refining furnace exhaust , which overcomes effectively the drawback of short life , little capacity and unable to inspect that the closed steel - water thermosion has
    本文以工程上常用的38 3的开口封底为实验元件,以水为工质,对开启式热管内的动态低负荷沸腾、稳态旺盛沸腾及临界沸腾特性进行系统的可视化实验研究,实验压力为0 . 02 0 . 8mpa ,实验得出了38 3的开口封底管在工作压力为0 . 02 0 . 8mpa和0 . 1 0 . 8mpa下的管内沸腾传热系数及临界热负荷计算关联式,弥补了开口封底管? ?这一新型传热元件尚无准确的沸腾换热关联式的缺陷。
  5. Simulation results show the effectiveness of the algorithm . based on the integration of rough set and neural networks , a rough neural network based on predictive model control strategy for alkali recovery boiler control is developed . the framework of alkali recovery dedicated control system is introduced in chapter 5 , including system hardware frame and software design and basic functions of system
    3 )针对碱回收蒸发工段具有强耦合、大时滞的特性,通过分析传统解耦算法的不足,提出了蒸发工段神经网络解耦控制方案,通过仿真证明方法的有效性;同时通过集成粗糙集和神经网络方法,提出了基于粗糙集的神经网络预测模型控制方案,并应用到碱回收炉的控制当中。

Related Words

  1. electrically heated boiler
  2. coke recovery
  3. sample recovery
  4. recovery arrangement
  5. drogue recovery
  6. rapid recovery
  7. data recovery
  8. recovery routine
  9. recovery winch
  10. recovery link
  11. recovery block
  12. recovery body
  13. recovery boundary
  14. recovery branch
PC Version

Copyright © 2018 WordTech Co.